REDARC – 150W MONOCRYSTALLINE SOLAR PANEL – SLIM LINE
REDARC standard monocrystalline flat panels are highly efficient with a robust design. A tempered glass coating and a sturdy aluminium frame ensure that our panels will withstand harsh road conditions and extreme weather conditions.
Each panel is tested at time of manufacture to conform to CE standards, so you can be sure that the panel output is exactly as described in its specification.
- Monocrystalline construction
- Strong Aluminium Frame
- Tempered glass coating
- Diode protected
- 5 year structural warranty
- 25yr/80% efficiency warranty
Placement of solar panels with regards to the sun
Ideally your solar panel should be in direct sunlight for best performance. This means that as much as possible your solar panel should be perpendicular to the direction of the sun rays. In practice this is not easily achievable or convenient and so we recommend that you orient your panels so that they are facing north at about a 45° angle.
|Dimensions||148 × 6.7 × 3.5 cm|
REDARC -TOW-PRO ELITE V3 ELECTRIC BRAKE CONTROLLER$360.50
REDARC continues to set the benchmark in trailer brake control technology which has seen the Tow-Pro Elite remain Australia’s favourite and most trusted brake controller.
The Tow-Pro Elite provides users with the ability to swap between Proportional mode (inertia sensing) for highway driving conditions and User-Controlled mode, popular for off-road driving.
This is the 3rd generation of REDARC’s Tow-Pro brake controller with the original released in June 2014 and the acclaimed Tow-Pro Elite released in September 2015.
REDARC – SMART START SBI 12V 100A$186.52
The REDARC Smart Start® SBI2 is a microprocessor-controlled battery isolator used in dual battery systems as a solenoid priority system. It will protect the start battery from excessive discharge, whilst allowing the auxiliary battery to supply non-essential loads. The SBI2 provides 12 volt DC incorporating 100A of continuous ratings.
Power Saving Technology
The battery isolator is primarily used in 4WD and commercial vehicles and incorporates electronic components that will prevent the solenoid from generating high voltage transients. It is better than a diode battery isolator due to the voltage drop associated with diode type isolation. It features a low standby current draw and sophisticated fault detection and LED indication of operation to warn the user of faults including over-voltage, voltage drop and excessive current draw conditions.
The Smart Start SBI12 battery isolator is a safe way to charge a dual battery system and should often be installed with a high quality fuse kit.
- Overmould design
- Compact in size and easy to install
- Silver contacts for longer life and suitable for marine applications
- Power saving technology
- Fault indication
- Fully surge protected
REDARC -190W SOLAR BLANKET SUNPOWER® CELLS$2,026.11
REDARC’s 190W Solar Blanket SunPower® Cells has been designed for portability and strength and feature no grid lines, a solid copper backing and thick connectors for higher efficiency. The unique design of Sunpower® cells reduces cell failure from corrosion and breakage.
Using an anti-reflective scratch-resistant ETFE coating, the 190W SunPower® blanket features a high melting temperature, is UV resistant and has chemical and self-cleaning non-stick resistance properties, making this blanket highly reliable and efficient.
Designed to charge 12V Automotive, Marine and Recreational Vehicle battery systems, the 190W SunPower® blanket will provide extra battery charge to power 12 volt equipment. This portable solar panel is compact and lightweight, making it easy to store and is about a third of the weight of an equivalent glass solar kit.
What’s more set up is now even easier thanks to genuine industry standard Anderson™ SB™50 connectors. These high quality Anderson™ plugs are simple and fast to connect with no screw terminals and no risk of poor connections from frayed wires or loose terminals – just plug and play!
REDARC recommends the purchase of a REDARC Solar Regulator, which is essential to ensure the correct charge is supplied safely and efficiently and will protect batteries from over charging. Minimum 20A Solar Regulator is required for the 190W SunPower® cell blanket.
Why not consider the REDARC 20 Amp Solar Value Pack, which includes all you need to connect your blanket to your battery. This pack includes a 5m cable, a 20A Solar Regulator and a battery clip cable.
This new generation, state-of-the-art solar blanket heralds an exciting new period in solar power in a lightweight, convenient sized package (115W solar blanket shown below).